Bischoff, P.H. (2007). Rational Model for Calculating
Deflection of Reinforced Concrete Beams and Slabs.
Canadian Journal of Civil Engineering, 34(8): 992-
1002.
DECLARATIONS
Acknowledgments
The author would like to thank the Department of
Civil Engineering, Federal University of Technology
Akure, Ondo State, for making available, the use of their
structural engineering laboratories.
Branson, D.E. (1965). Instantaneous and Time-Dependent
Deflections of Simple and Continuous Reinforced
Concrete Beams. HPR Report No. 7, Part 1, pp. 1-78,
Alabama Highway Department, Bureau of Public
Roads, Alabama.
Author’s contributions
BS 8110-1 (1997). Structural Use of Concrete – Part 1:
Code of Practice for design and construction. British
Standards Institution, London.
The author of this research paper have directly
participated in the planning, execution, or analysis of this
study and have read and approved the final version
submitted.
BS 812 -103.1 (1985). Testing aggregates – Part 103:
Methods for determination of particle size
distribution – Section 103.1 Sieve tests. British
Standards Institution, London.
Conflict of interest statement
I hereby states that, there is no conflict of interest
whatsoever with any third party.
CEN 2 (2002): Design of Concrete Structures – Part 1:
General Rules and Rules for Building. European
Committee for Standardization, Brussels, Belgium.
REFERENCES
Gilbert, R.I. (1999). Deflection Calculation for Reinforced
Concrete Structures – Why We Sometimes Get It
Wrong. ACI Structural Journal, 96(6): 1027-1033.
ACI 318. (2005). Building code requirements for
structural concrete. ACI Committee 318. Farmington
Hills, MI: American Concrete Institute.
Gilbert, R.I. (2006). Discussion of "Re-evaluation of
Deflection Prediction for Concrete Beams Reinforced
with Steel and Fiber Reinforced Polymer Bars" by
Peter H. Bischoff. Journal of Structural Engineering,
ASCE, 132(8): 1328-1330.
ACI 435R (2000). Control of Deflection in Concrete
Structures. ACI Committee 435. Farmington Hills,
MI: American Concrete Institute.
Akmaluddin, A., and Thomas, C. (2006). Experimental
Verification of Effective Moment of Inertia used in
the Calculation of Reinforced Concrete Beam
Deflection. In Proceedings of the International Civil
Engineering Conference “Towards Sustainable Civil
Engineering Practice” Surabaya, Indonesia, pp 609 -
625.
Kalkan, I. (2013). Deflection Prediction for Reinforced
Concrete Beams Through Different Effective
Moment of Inertia Expressions. International Journal
of Engineering Research and Development. 5(1): 210
– 225.
Nkuma, L. (2013). Effectiveness of BS 8110 Control
Measures on Deflection at Service, 500 L Seminar,
Federal University of Technology, Akure, Ondo
State, Nigeria.
Al-Zaid, R.Z., Al-Shaikh, A.H., and Abu-Hussein, M. M.
(1991). Effect of Loading Type on the Effective
Moment of Inertia of Reinforced Concrete Beams.
ACI Structural Journal, 88(2): 184-190.
Scanlon, A., Cagley Orsak, D.R., and Buettner, D.R.
(2001). ACI Code Requirements for Deflection
Control: A Critical Review. SP203-01, American
Concrete Institute, Farmington Hills, Michigan.
Al-Shaikh, A.H. and Al-Zaid, R.Z. (1993). Effect of
Reinforcement Ratio on the Effective Moment of
Inertia of Reinforced Concrete Beams. ACI Structural
Journal, 90(2): 144-149.
Wight, J.K., and MacGregor, J.G. (2009). Reinforced
concrete mechanics and design: Fifth edition. Prentice
Hall: Pearson Education International.
Ammash, H.K., and Muhaisin, M.H. (2009). Advanced
Model for the Effective Moment of Inertia taking into
account Shear Deformations Effect. Al-Qadisiya
Journal for Engineering Sciences, 2(2): 108 – 128.
Ammash, H.K., Hemzah, S.A. and Al-Ramahee, M.A.
(2018). Unified Advanced Model of Effective
Moment of Inertia of Reinforced Concrete Members.
International Journal of Applied Engineering
Research, 13(1): 557 – 563.
ASTM C150-02a (2002). Standard specification for
portland cement, American Society of Testing
Materials, West Conshohocken, Pennsylvania, USA.
Bischoff, P.H. (2005). Re-evaluation of Deflection
Prediction for Concrete Beams Reinforced with Steel
and Fiber Reinforced Polymer Bars. Journal of
Structural Engineering, ASCE, 131(5): 752-762.
To cite this paper: Olanitori LM (2019). Effective Moment of Inertia of Single Spanned Reinforced Concrete Beams with Fixed Beam-Column Joints. J. Civil Eng. Urban., 9 (1):
16